Steelmax® D1 Portable Magnetic Drill 2" Depth of Cut

Steelmax® D1 has higher power, weighs less, and has more features than any drill in its class. Steelmax® D1 accepts up to 1-3/8" dia. cutters with a 2" maximum depth of cut.
• New exposed motor cord
• Ultra compact 14-13/16" working height (with coolant bottle)
• Adjustable cutter guard with built-in chip breaker
• Through-spindle coolant system with removable reservoir
• Little maintenance with no gib adjustment and extreme accuracy
• Fewer parts result in less run-out
• “Safe Magnet” circuitry recognizes magnetic holding power
• Spring slug-ejecting arbor system
• Magnet uses 50% power when motor is not under load
• Advance motor for easy field service
D1 Specifications
• Height: 14-13/16" maximum; 12-1/16" minimum
• Width: 6-3/8"
• Length: 9-1/2"
• Weight: 22 lbs.
• Motor: 1.3 hp 920W (single phase); 120V/350 RPM (load)
• Arbor bore: 3/4"
• Drill point breakaway: 859 lbs.
• Magnetic base: 3-1/8" x 6-5/16" x 1-7/16"
• Magnetic dead lift: 2,135 lbs.
• Cutter dia. (maximum): 1-3/8"
• Depth of cut (maximum): 2"
• Centerline pilot to magnet face: 1-9/16"
• Centerline pilot to motor face: 2-3/8"
NOTE: Magnet needs a minimum of 3/8" of material for the magnet to hold; insufficient thickness will cause the magnet to lose hold and the system will not allow the motor to start.
CAUTION: Any cutting tool may break or shatter under improper use. Government regulations require use of safety glasses and other appropriate safety equipment at all times in the vicinity of use.